Cummins China have five manufacture plants. Most of models are manufactured by Cummins China : EQB, 4B3.9, 6B5.9, 6C8.3, 6L8.9, ISBe, ISDe, ISC, ISL9, ISZe13, ISMe11, ISF2.8, ISF3.8, ISG, M11, N855, QSB,QSL,QSZ, QSM, K19,K38,K50 ,QSK for all the application: bus, truck, construction machines, water pump and fire pump, mining, generator G-drive, marine propulsion and auxiliary for marine generator. All those engine’s parts are available for you.
In 1979, Cummins China Beijing office had been set as the first foreigner investor in China. Until 2014, Cummins has set few engines plants like DCEC(Xiangyang Dongfeng Cummins),CCEC(Chongqing Cummins),XCEC(Xi’An Cummins),BFCEC(Beijing Foton Cummins),GCEC(Guangxi Liugong Cummins), seven parts plates(filters system ,Holset system,Wuxi alternator, Wuhan Fuel system, Emission System) and two centers of innovations(Xiangyan and Wuhan).
Dongfeng Cummins Engine Co., Ltd is located in High-tech Industrial Development Zone Xiangyang, which is a Joint Venture Company accounted for 50% share by Dongfeng and Cummins USA, mainly manufacture diesel engines.
The company is a national high-tech enterprises, mainly produce Cummins B, C, L series mechanical diesel engine and ISDe, ISLe, ISZ series electronic diesel engine, and B series natural gas engine, the engine displacement is 3.9L, 4.5L, 5.9L, 6.7L, 8.3L, 8.9L, 13L, power coverage 125-545HP. The products are widely used in light, medium and heavy truck, senior intercity buses, large and medium-sized buses, construction machinery, marine engine and generator set etc, can meet the China/Euro II, III and IV emission regulations.
Dongfeng Cummins engine are mainly for Dongfeng market; while recent years, the company actively extend their markets, the engines are also widely used on Valin Truck, Yutong Bus, Jinlong Bus, Liugong Machinery and other well-known domestic automotive and engineering machinery manufacturing factory.
With years of efforts, Dongfeng Cummins have gradually realized the synchronous development with Cummins USA, they are already pass the ISO/TS16949:2002 quality management system, the automotive industry ISO/14001:2004 environmental management system and OHSAS18001: 1999 occupation health and safety management system of the third party certification. Meanwhile Dongfeng Cummins continuously improve product quality, and expanding the market share, made its comprehensive strength increased continuously.
Chongqing Cummins Engine Co., Ltd. is a Joint Venture(China and USA), was founded in October 1995, located in Chongqing City.
Chongqing Cummins is the Cummins starting point of the localization of production in China, also the China’s largest heavy duty and high horsepower engine manufacturing plants. In 1981, Cummins and the former SinoTruck officially signed a license agreement, began producing the large horsepower Cummins engine in Chongqing. After years of development, cooperation between the two sides continue to deepen, Chongqing Cummins has been an important driving force for the rapid growth of Cummins’s business in China market.
The company mainly produces Cummins N, K, M series diesel engines, generators and other power units, the Cummins engine power range 145 – 1343KW, annual production capacity is 15000 units. The product is suitable for large passenger cars, heavy trucks, engineering machinery, mining machinery, petroleum machinery, railway machinery, port machinery, power station, fixed and mobile diesel generator set, ship propulsion power, auxiliary power unit, pump power unit and power machine equipment.
The main products can meet the China, Europe, American emission standard which requirements for the on-road Euro II and Euro III stage emission standard, also for off-road Tier 1 and Tier 2 stage emission standard.
Xi’an Cummins Engine Co., Ltd. is a Joint Venture(China and USA), was founded in December 2005, located in Xi’an City. Officially put into operation on August 8th, 2007, the annual production capacity is 50 thousand units.
Xi’an Cummins synchronization introduce the European and American markets technology model, produce Cummins ISM series 11 liters electronic heavy-duty diesel engine. The engine is the flagship power for heavy truck and equipment, targeting high-end heavy-duty engine field, power range 308-440 horsepower, can meet Euro II, Euro III, Euro IV emission standards, the global inventory is nearly 500 thousand units, average overhaul mileage over one million kilometer, total mileage over 300 billion kilometer, with the first-class reliability and durability after the test. The Euro III series engine has been in successful application in the European market over 10 years, mainly support for the world famous truck brand, like International Truck, Kenworth, PeterBilt, and Chinese brand like XCQC, Hongyan, Foton, Valin, Kinglong, Yutong, Ankai, JAC, LCK and XCMG as the world class idea power.
Cummins ISM series has good advantage on engine high torque at low speed, good fuel economy, strong power, and good maneuverability, low noise, can be widely used in the field of heavy trucks, large passenger cars, special vehicles, engineering machinery, generator set and so on, which is the ideal power for large passenger cars, heavy trucks, engineering machinery, cranes and special vehicle etc.
On October 15th, 2010, the 10000th ISM model 11 liter electronic diesel engine off the assembly line. Xi’an Cummins is not limited to occupy the domestic heavy truck market, but also began to export to the world, forming a service network based on South America, Southeast Asia, Eastern Europe to the global market.
Foton Cummins Engine Co., Ltd. is a Joint Venture(China and USA), was founded in March 2008, located in Beijing. The investment of the project is more than two billion and seven hundred million RMB, with an annual production capacity up to four hundred thousand units, which is the largest commercial vehicle between Cummins and China, also the largest production base of light diesel engine in China.
The Cummins ISF2.8 and ISF3.8 series light inline four cylinder high pressure direct injection diesel engine is a new generation of electronic light diesel engine research and development by Cummins for future.
Since the Foton Cummins ISF series engine put into operation, with its world-class quality and performance, energy conservation and environmental protection advantages, and perfect fitted with many well-known domestic and foreign manufacturers, the light trucks throughout the global market, which occupy a dominant position in the high-end light diesel engine market. Up to now, Foton Omar, Ollin, JAC, Russian GAZ, Brazil Volkswagen Manchester, South Korea’s Daewoo bus has been successfully equipped with ISF series engine, from Euro III to Euro V different products to meet different needs of the market.
The ISF series engine power range 80-125 kW, peak torque up to 600 N.m, which power is the strongest, minimum weight and volume comparing with other similar products, meanwhile the products meet the Euro III, Euro IV and Euro V emission standards, which can easily meet the higher standard.
Guangxi Cummins is the first Cummins manufacturing facility in China dedicated to providing power for the construction machinery market. It is also one of the largest production facilities for off-highway diesel engines in China.
LiuGong Machinery Corporation has been a leader in China’s construction equipment manufacturing industry. From building the country’s first modern wheel loader, LiuGong has evolved to become one of the fastest growing, global, full-line CE companies in the world. LiuGong delivers opportunity to its employees, quality products and services to its customers, financial success to its investors, and community support in the regions it serves.
Liugong Cummins 9.3-liter engine is designed and built in China specifically for construction equipment to meet the demand of both LiuGong and other equipment manufacturers. The engine is available in multiple versions to meet various off-road emissions standards.
Our products range is one of the most widely and most modern products in the diesel engine field. We offer a comprehensive, robust and reliable engine solution for yachts, merchant and naval vessels, construction and industrial vehicles while serving agricultural machinery, mines, railways and military vehicles as well as the oil and gas industries. We offer a full range of services to help you maximize uptime and performance.
To date, ENGINE FAMILY continues to provide professional, tailored and economic solutions to its customers and focuses on the commissioning, design, supply and installation of quality products as well as providing second to none pre and after-sales service. After years of development, ENGINE FAMILY has established business relationships with more than 5000 business partners across more than 160 countries and regions and participated in many international cooperation projects successfully, including locomotive renovation, renovation of special purpose equipment, business solutions, power system solutions and energy supply system solutions. With its professionalism, good service, high efficiency and large expansion, ENGINE FAMILY has won recognition and high praise from customers.
If you’d like to place an order, send your request to our sales team. The total price for the requested parts will include price, weight, manufacturer’s name, availability and the delivery terms. The actual information about ENGINE FAMILY leading brands you will get within several hours.
We ship parts throughout the world by air and sea. We work with multiple shipping companies to ensure you get your parts on time and at the lowest cost.Welcome to contact us to find your engines, spare parts. We will do our best to satisfy your requests and service you with our honesty.